Mineral Plant Hematite Concentration CTB(N/S) Wet-type drum permanent Magnetic Separator
Mineral Plant Hematite Concentration Wet-type drum permanent Magnetic Separator
| Magnetite Mineral Processing/ Iron ore concentrate processing |
| 1). The crude ore first proceed the preliminary broken through jaw crusher, generally divide into coarse crushing and fine crushing two stages. 2) the appropriate stone size(10-20 mm) will be get from the last process, then will be evenly feed into the ball mill through the elevator and mining feeder, the ball mill break and grind the ore into the fine ore; then feed into the spiral classifier, 3) Due to the gravity differences of the solid particles, their deposition rate will be different too, using this theory; the spiral classifier will wash and classify the fine ore particles. 4) The washed and classified fine ore particles will be sent to the magnetic separator, making use of minerals susceptibility differences, magnetic separator will separate the magnetic minerals from the fine ore particles mixers by the magnetic force and mechanical force, and get 65% iron ore concentrate. |
1.Introduction of CTB wet magnetic separator
Series CTB wet magnetic separator is usally used for sorting the fine-grained magnetic minerals, or removing magnetic minerals from non-magnetic minerals. Its composite magnetic system consists of high performance rare earth permanent magnet (main magnetic source) and ferrite permanent magnet. With a deep magnetic field, the machine can make a continuous row of ore feed and discharge. It also has enough working clearance and high processing capacities
Applicable scope:
The permanent magnetic drum separator are used in mines and coal separating factories to separate the wet fine magnetic substances or remove the magnetic substances from the non-magnetic materials
Technical Characteristics:
The separators have three types of tanks :half countercurrent tank(CTB),direct flow tank(CTS) and countercurrent tank(CTN),which are used according to different granular and technological requirements.
The features of our products are :optimized computer design ,rational magnetic circuit, strong magnetic coercive force and high-remanence permanent magnetic which can keep the magnet performance in a long period and safeguard the long -term interest of the customer, the whole structure is reliable.
2.Working principal of CTB wet magnetic separator
When the ore pulp goes into the separation area of the wet drum magnetic separator, as a result of different magnetic susceptibilities of a variety of minerals, under the magnetic force, the magnetic minerals are absorbed to the surface of drum, and are brought to the discharge area for ore concentrate along with the rotation of drum, then after leaving the magnetic system, the magnetic materials are flushed to ore concentrate box by the flushing water; Weak magnetic and non-magnetic minerals can not be absorbed and will flow to the discharge pipe for tailings.
3.Working principle diagram
4.Advantage of wet magnetic separator
♦ High magnetic field intensity
♦ Magnetic field depth, uneasy demagnetization
♦ High efficiency
♦ Strong adaptability of production fluctuation
5.Technical parameter of the machine
| Type | Insidepath(mm) | Length(mm) | Gs(r/min) | Feed Size(mm) | Capacity(t/h) | Power(KW) | Weight(kg) |
| CTB(N/S)-612 | 600 | 1200 | <35 | 2-0 | 10-20 | 1.5 | 1050 |
| CTB(N/S)-618 | 600 | 1800 | <35 | 2-0 | 15-30 | 2.2 | 1340 |
| CTB(N/S)-718 | 750 | 1800 | <35 | 2-0 | 20-45 | 2.2 | 2100 |
| CTB(N/S)-918 | 900 | 1800 | <35 | 3-0 | 40-60 | 3 | 2900 |
| CTB(N/S)-924 | 900 | 2400 | <28 | 3-0 | 45-70 | 4 | 3600 |
| CTB(N/S)-1018 | 1050 | 1800 | <20 | 3-0 | 50-75 | 5.5 | 4000 |
| CTB(N/S)-1021 | 1050 | 2100 | <20 | 3-0 | 50-100 | 5.5 | 4500 |
| CTB(N/S)-1024 | 1050 | 2400 | <20 | 3-0 | 60-120 | 5.5 | 5000 |
| CTB(N/S)-1218 | 1200 | 1800 | <18 | 3-0 | 80-140 | 5.5 | 4900 |
| CTB(N/S)-1224 | 1200 | 2400 | <18 | 3-0 | 85-180 | 7.5 | 5900 |
| CTB(N/S)-1230 | 1200 | 3000 | <18 | 3-0 | 100-180 | 7.5 | 7200 |
6.pictures about wet magnetic separator
Company Information
Certification
Our customers :
FAQ
1.What main products do you supply?
- Ball mill with air classifying production line
- Quartz Feldspar (galss sand) wet process production line
- High pure sand making machine
- GF Air classifier
- Dust collector
- High gradient vertical ring magnetic separator
- Plate type magnetic separator (Up to 15000GS)
- Drum/Roller type permanent magnetic separator
- GSC series hindered settling machine density separator
- EPC service for whole equipments
2 . Are you a trading company or factory?
- We are professional manufacturer of non-metallic minerals separation equipment , EPC service supplier for engineering/Procurement/Construction ,You are welcome to visit our factory and discuss for further business.
3. Delivery date for my order?
- 5 to 15 days for generally single equipment
- 30 to 45 days for whole production line.
4 .How about your payment methods?
- Generally 30% in advance for down payment and balance paid before shipment
- Accept T/T, Western Union, Cash, L/C at sight. etc.
- Suggest Alibaba as third party for business.
5. How do you handle the shipment for my order?and Packing?
- Its the most economic way to receive your order. Totally seaworthy packing and pallet for delivery.
- Small parts are wooden case packing and inner film proctection
- Big parts are containers for delivery and steel wire/wooden material for stablly fastened and plastic film for protection.
- We could accept customized packing terms.
6. What is your company warranty policy?
- 12 months warranty since machinery in working process or 18 months since the equipment get into shipment.
- Whole life for offering spare parts and technical problems shooting and update.
7. Do you offer any replacement for my order?
- Yes, we will offer you the replacements based on the model and quantity you are going to order.
8. How can I contact to you?
- contact :We could make whole production line or single equipment following different clients requirements.
- For whole process as below:
Firstly, Please offer detailed technical drawing in CAD or requirements. Secondly, we will offer different technical proposals follwing offered drawings or requirements for clients. Thridly make decision for which proposal.At last manufacture whole equirements following techncial proposal and holding test in warehouse. Finally finished equipment/prodcution line offered as turn-key project.